When you’re wanting to make use of the 3M Peltor WS Litecom Professional III headset with an exisiting two method radio, you will have to program the frequencies out of your radio to the headset. This course of could be a bit intimidating at first look however in just some steps, we’ll have your frequencies programmed to your headset with no hassle.
What Litecom Headsets Can Be Programmed
Solely the 3M Peltor WS Litecom Professional III headsets might be programmed to an current two-way radio. Yow will discover the entire fashions with WS beneath.
What You Want
For detailed directions on putting in 3M Peltor Service Software, learn extra right here.
Word: When you bought the Litecom headsets from First Supply Wi-fi, contact us and we are able to give you the obtain file for 3M Peltor Service Software Software program. (Proof of buy could also be required).
Necessities
- An current UHF two-way radio
- Home windows 7, 10
1. Set up and Open 3M PELTOR Service Software Software program
Obtain and set up the 3M PELTOR Service Software. You possibly can contact 3M PELTOR Buyer Service for the obtain file.
Subsequent, open the software program. It should ask you to request a license key. 3M will give you a license key inside 48 hours. Proof of buy/bill could also be required.
Word: When you bought the Litecom headsets from First Supply Wi-fi, contact us and we are able to give you the obtain file for 3M Peltor Service Software Software program. (Proof of buy could also be required).
2. Plug the FLA07 Programming Cable Into the Laptop
Plug the USB finish of the FLA07 programming cable into the USB port in your pc. Your pc will make a tone letting you realize the pc recognizing the USB.
3. Plug the Programming Cable into Your Litecom Headset
Your headset have to be powered OFF. Plug the opposite finish of the FLA07 programming cable into the headset port discovered on the underside of the precise ear cup. The holes within the cable ought to align with the prongs contained in the port.
4. Put the Litecom Headset into Programming Mode
Maintain the facility button and quantity up (+) button concurrently for about 3 seconds. The LED will double flash when in programming mode.
On the PELTOR Service Software, you’ll see linked on the backside exhibiting the headset is efficiently linked.
5. How one can Program Frequencies onto the Headset
Open this system in your pc if not already open, go to configuration within the prime left nook. You possibly can both begin a brand new file or add a file that’s already been created by going to open machine configuration in new tab. This may open up your file explorer the place you’ll be able to add the file.
Within the configuration tab, on the facet menu, go to two-way radio > channels.
You’ll have to kind in your transmit frequencies and obtain frequencies in addition to obtain subchannel and an analog subchannel.
As soon as full, click on save.
6. Write Configuration to Gadget
After you enter the frequencies and subchannels, click on on write configuration to machine button.
The software program will then obtain the frequencies onto your headset. A pop up ought to seem to let you realize it was profitable.
Repeat this step for every headset you need to program. Be sure that the headset is plugged into the pc earlier than writing.
Want Assist?
We perceive this course of could be a bit intimidating at first. Allow us to allow you to program your WS Litecom PRO III to your current two-way radio fleet. Attain out to us on the contact info beneath to get extra info.
Cellphone: 800-991-4569
E-mail: assist@firstsourcewireless.com
